Aluminum facade systems MC WALL, MC PASSIVE and MC PASSIVE+
aluminum facades
The system is intended for designing modern aluminum façades (curtain walls) with simple and complex shapes. The MC WALL curtain wall consists of vertical mullions and horizontal transoms connected by stainless steel brackets. There are two connectors with a diameter of 6 mm per one node of the aluminum façade, giving a very high load bearing capacity of the mullion-transom connection. The system is expanded with aluminum façades with increased thermal insulation of MC PASSIVE and MC PASSIVE+.
Depth of mullion
10 - 326 mm
Depth of transom
10 - 294 mm
Glazing range
4 - 59 mm
Mullion-transom visual width
55 mm
Acoustics
54 (-1, -6) dB
Thermal insulation Uf
from 0,84 W/m2K*
*thermal insulation is dependent on a combination of profiles and thickness of the filling
Aluminum facades with increased thermal insulation
MC PASSIVE
The MC PASSIVE mullion and transom system is an extension of the MC WALL system. The MC PASSIVE aluminum façade has increased thermal insulation with an insulation coefficient Uf of 0,79 W/m2K. Such thermal parameters were obtained thanks to a special insulator applied in the space of the termination bar or the spacer additionally placed under the screws fixing the termination bar. To achieve even better thermal properties, thermal breaks made of hard PVC, clipped into the sections of mullions and transoms, have been equipped with additional horizontal “splines” made of soft PVC.
MC PASSIVE+
The MC PASSIVE+ aluminum façades are also an extension of the MC WALL mullion and transom system intended for designing modern curtain walls. The MC PASSIVE+ system has even higher thermal insulation parameters than the MC PASSIVE version. The thermal insulation coefficient Uf at the level of 0,61 W/m2K was obtained thanks to the use of a special insulator made of innovative materials. Such thermal parameters perfectly match the needs of energy-efficient and passive construction.
Technical data and specification of aluminum facades
MC WALL
| Depth of mullion: | 10 - 326 mm |
| Depth of transom: | 10 - 294 mm |
| Glazing range: | 4 - 59 mm |
| Mullion-transom visual width: | 55 mm |
| Acoustics: | 54 (-1,-6) dB |
| Mullions / transom rigidity: | up to 2,5-4092 cm4 / up to 0,9-1831,1 |
| Thermal insulation Uf: | Uf from 0,84 W/m2K |
| Air permeability: | Class AE1500; EN 12152 |
| Windload resistance: | 2600Pa - 3900Pa; EN 13116 |
| Watertightness: | Class RE1950; EN 12154 |
MC PASSIVE
MC PASSIVE+
A sample distribution of isotherms for aluminum façade mullions
MC WALL façade mullion isotherms
MC PASSIVE façade mullion isotherms
MC PASSIVE+ façade mullion isotherms
Selected paints available in aluminum window and door systems based on Aliplast solutions
The aluminum window and door systems we build based on Aliplast profiles are available in six richly colored paint palettes. Selected paint samples are presented below, and all available paints are presented in the Window Colors section [click the button below]. We invite you to take a look at our offer.
Examples of Tiger paint patterns
3004ST
(029/30706)
5011ST
(029/40782)
7011ST
(029/73230)
7039ST
(029/71716)
7035ST
(029/72111)
9006ST
(029/90146)
Examples of Wood Colour Effect paint patterns
light concrete
(LOVI01)
dark concrete
(LOVI02)
golden oak
(WDZD01)
walnut
(WDOR01)
winchester
(WDWN01)
pine
(WDSN01)
Examples of Timeless Colours paint patterns
7016TC
(068/70190)
7023TC
(068/71731)
7039TC
(068/71291)
7044TC
(068/71732)
9010TC
(068/10259)
9016TC
(068/10079)
Examples of Life Colours paint patterns
7000LC
(1011756P)
7010LC
(029/71569)
7015LC
(029/71719)
8014LC
(029/60488)
7040LC
(029/72710)
9007LC
(029/72004)
Examples of IGP Pulvertechnik paint patterns
1014S2
(591TA10140R10)
5009S2
(591TA50090R10)
5014S2
(591TA50140R10)
8003S2
(591TA80030R10)
9016S2
(591TA90160R10)
SP7162
(591TE70160R10)
Examples of Anodising Colours paint patterns
natural
(C-0 ES)
clear champagne
(C-31 ES)
champagne
(C-32 ES)
olive
(C-33 ES)
brown
(C-34 ES)
black
(C-35 ES)
